X-lite X-1004 Sécurité Et Instructions D'utilisation page 19

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WARNING
-
The protection level of this helmet whilst riding depends upon the configuration
adopted by the user: total protection if the chin guard and visor are closed,
partial protection if the chin guard and/or visor are open.
-
Do not remove nor tamper with the fixing screws that connect the chin guard
to the shell.
-
Do not use the helmet without the chin guard.
-
Never use the helmet in case of malfunctioning and/or damages of the chin
guard opening system. In case of doubts regarding the correct operation of the
chin guard opening mechanism, contact an X-Lite authorized dealer.
VISOR
3.
Visor Disassembly
3.1.
Close the chin guard (if open) and open the visor completely.
3.2.
Press and hold the visor release button (A) down and slide the visor forwards
until it clicks. (Fig.5).
3.3.
Free the visor fastenings (B1 and B2) from their seats. (Fig.6).
3.4.
Repeat the same steps on the other side of the helmet.
4.
Visor Assembly
4.1.
Close the chin guard (if open) and set the visor in open position by placing the
visor fastenings (B1 and B2) in line with the housings in the visor mechanism
(Fig.6).
4.2.
Insert fastening B1 in the provided housing and press the visor against the shell
in line with fastening B2. This will push the visor release button (A).
4.3.
Slide the visor backwards until the visor release button (A) clicks.
4.4.
Repeat the same steps on the other side of the helmet.
4.5.
Close the visor completely.
WARNING
-
Make sure that the mechanisms are working properly. Open the visor; while
lifting the chin guard, the visor should automatically close. If necessary, repeat
the above-mentioned steps.
-
Make sure that the mechanisms are working properly. Open and close the vi-
sor, making sure that the mechanisms hold it in the different positions. If nec-
essary, repeat the above-mentioned steps.
-
Do not use the helmet if the visor has not been assembled properly.
-
Do not remove the side mechanisms from the chin guard.
-
Should any of the side mechanisms fail or be damaged, please refer to an
X-Lite authorized dealer.
19

Publicité

Table des Matières
loading

Table des Matières