Storing The Camera Settings In Memory - Presetting Feature - Sony BRC-H900 Mode D'emploi

Storing the Camera
Settings in Memory
– Presetting Feature
Up to six combinations of settings (six positions)
including camera position, zooming, focusing, and
backlighting, can be preset.
Note
The camera can store up to sixteen combinations of
settings (sixteen positions) in the memory, but the
supplied Remote Commander supports preset of six
positions only (POSITION 1 to 6). Use the RM-BR300
Remote Control Unit (not supplied) to store the settings
in POSITION 7 to 16.
For details of the camera settings to be preset, see
"Presetting Items" on page 78.
3
PRESET
2
1
Press the PAN-TILT RESET button to reset the pan/
tilt position.
2
Adjust the position, zooming, focusing and
backlighting of the camera (pages 44 to 46).
3
While holding down the PRESET button, press any
of the POSITION buttons, 1 to 6, in which you want
to store the settings.
DATA SCREEN
STD
1
4
PRESET
While holding down
POSITION
The message "PRESET No.xx" (selected
POSITION number) is displayed for about 2
seconds.
2
3
POSITION 1~6
RESET
1
BACK LIGHT
REV
2 3
Press a POSITION
5 6
button.
RESET
Note
Before you store camera settings such as camera
position, zooming, focusing, etc., in the memory, install
the camera suitably and fix the camera securely. If you
change the installation of the camera after storing,
differences may arise on the preset.
To recall the stored settings
Press any of the POSITION buttons, 1 to 6, in which you
have stored the settings.
To cancel the preset memory
While holding down the RESET button, press the
POSITION button from which you want to cancel the
settings.
DATA SCREEN
STD
1
4
PRESET
POSITION
While holding down
Notes
• When the power is turned on, the camera starts with
the settings stored in POSITION 1.
• If you want to retain the previous pan and tilt
positions, etc., when the power is turned off and turned
on again, store those positions in POSITION 1.
• Storing or canceling the settings in POSITION 1 takes
about two seconds longer than those of other
positions.
• When you are storing or canceling the settings in one
POSITION, you cannot call up, store or cancel the
settings in another POSITION.
• For details about the memory that you can erase, see
"Presetting Items" on page 78.
Storing the Camera Settings in Memory – Presetting Feature
BACK LIGHT
REV
2 3
Press a POSITION
5 6
button.
RESET
47
GB