Program-Mode - Hammer CROSSLIFE XTR Manuel D'utilisation

5.4.4 PROGRAM-Mode

1) PROGRAM-Selection
Starting your exercise, the already set data will start
counting backwards.
computer will stop and a beep will be heard. If you
didn´t set any values, all data will start counting up.
2) Profile selection
3) Setting of values
If the set data reach 0, the
→
OFF, 10:00-99:00min
33
check 2) Profile selection
OFF, 120-199
Schläge/Minute
Starting your exercise, the already set data will
start counting backwards. If the set data reach
0, the computer will stop and a beep will be
heard. If you didn´t set any values, all data will
start counting up.
P1-P12