Answering Calls Via Telephone With Rhl Function; Conference Calling - Jabra GN Netcom GN9350 Guide D'installation Et D'utilisation

2. Remove headset from base, or press headset's talk button if already wearing it.
–> RHL/EHS function will activate (handset lifts/telephone line connection opens).
3. Dial desired number.
4. Replace headset in base, or press the headset's talk button.
–> RHL/EHS function will deactivate (handset lowers/telephone line connection closes).
GN 9350 GN 9330
4.2 Answering calls via telephone with RHL/EHS function
1. The telephone rings.
2. Remove headset from base, or press the headset's talk button.
–> The call will be connected (handset lifts/telephone line connection opens).
Important: During an incoming call, your headset will automatically change to the required mode,
depending on whether the call is coming via the desk phone (telephone) or via VoIP (US�). After
the call, it will revert to the default mode you selected earlier. The initial factory-set mode is the
telephone mode.
GN 9350 GN 9330
4.3 Conference calling
Conference calling lets several headsets join together for a call. The primary headset (A) + 3
extra headsets (�) can join a conference call initiated by the primary headset. (See illustration.)
Making conference calls
1. Remove primary headset from base; make sure link is established. Indicators on base and
headset are flashing.
2. Place secondary headset in primary headset's base and press pairing button on base.
–> Primary base's telephone and US� mode indicators, and secondary headset's link indi-
cator, will light for 2 seconds.
3. Remove secondary headset from primary headset's base.
4. After a 4-pitch tone is heard in the primary headset, press its talk button.
GN 9330 USB
GN 9330 USB
11