Trevi HCX 10D8 DAB Mode D'emploi Et Connexion page 13

ENGLISH
Full scan: allows you to scan the entire DAB / DAB + band and automatically store the found stations.
Manual tune: allows you to manually scan a single DAB / DAB + frequency. Press the:/TUN+ o 9/TUN- key to select the
channel number for the frequency to be scanned and then press the SELECT (14) key to start scanning. The found stations will
be automatically stored. At the end, long press the MENU / INFO key (13) to return to the DAB menu.
DRC: allows you to enable / disable the DRC function to improve the sound while listening in noisy environments. The DRC level
can be set up (high), low (low) or OFF (off).
Prune: allows you to delete from the list of stations stored all the radio found but not available (poor signal). Move with the keys:/
TUN+ o 9/TUN- to Y (YES) and confirm the deletion with the SELECT key (14).
System: allows access to the system submenu:
Language: it is possible to choose the language of the menus; Italian, English (default), Deutsch, Spanish, Dutch, Francais are available.
Factory Reset: allows you to reset the device to the factory settings. At the end of the reset an automatic scan of the DAB / DAB
+ stations will be performed. Move with the keys: / TUN + or 9 / TUN- to Y (YES) and confirm with the SELECT key (14).
SW version: allows you to view the software version of the device.
STORING RADIO STATIONS
To store a radio station, perform the following steps:
1. Tune to the desired radio station.
2. Long press the MEMORY key (3), the display will show PROG.
3. Use the:/TUN+ o 9/TUN- keys to select a memory location.
4. Press the SELECT (14) button to confirm and save the radio station.
Repeat this operation for each radio station you want to save. There are 20 memory locations available.
5. To call up a stored radio station use the CH + (18) and CH- (14) buttons.
CD-MP3 PLAYER OPERATION
REPRODUCTION
1. Switch on the appliance and press the SOURCE button (6) several times until the CD READ indication appears on the display,
indicating that the disc is being loaded. If the disc is not on the display the NO DISC indication will appear.
2. Open the CD compartment (1) by lifting the door at the center point (OPEN text) and insert the disk, with the written side facing
up. Close the door gently.
3. After a few seconds the display (3) will show the number of tracks on the disc. Press the button to activate music playback.
4. Press the  button to activate the pause, the display will show the flashing symbol. Press the key again to deactivate the pause.
5. Press the button to stop playback permanently.
JUMP TRACE AND QUICK SEARCH
1. Press the :/TUN+ o 9/TUN- to move to the previous track or next one.
2. Press and hold the :/TUN+ o 9/TUN- during playback to quickly search a particular musical passage. Release the button to
return to normal playback.
REPEAT
• Press the REPEAT button (6) on the remote control, until the RPT ONE indication appears on the display to reproduce the same
track continuously.
• Press the REPEAT key (6) on the remote control until the RPT ALL indication appears on the display to continuously reproduce
all the tracks present.
• Press the REPEAT button (6) on the remote control until the RPT FOLD indication appears on the display to continuously play all
the tracks in the selected folder (only for MP3 CDs containing folders).
• Press the REPEAT (6) key on the remote control until the NORMAL indication appears on the display to play back all the tracks
present only once.
• Press the RANDOM button (13) on the remote control (the RANDOM indication appears on the display) to randomly reproduce
all the tracks present. Press it again to deactivate the function.
ALBUM FUNCTION
NOTE: function valid only for MP3 CDs containing folders.
1. When playing an MP3 CD with multiple folders, press the FOLDER + (5) and FOLDER- (7) buttons to select the folder you want
to play.
HCX 10D8 DAB
13