Trevi HCX 10D8 DAB Mode D'emploi Et Connexion page 11

ENGLISH
The remote control comes with a cell battery already installed. To activate the
battery, remove the transparent tab at the bottom of the remote control. The remote
control is now ready to use.
To Replace With a New Battery:
1. Remove the battery compartment cover as per the illustration on the right.
2. Observe the correct polarity and install a 3V
3. Close the cover.
DESCRIPTION OF COMMANDS
1. Key , on / standby
2. Numeric selection keys
3. MEMORY button
4. 9 / TUN- button, previous track / radio station
5. FOLDER + button, next folder selection in CD or USB mode
6. REPEAT button, activates the repeat mode
7. FOLDER- button, previous folder selection in CD or USB
mode
8. INFO, SCAN, MENU buttons on DAB / FM radio source
9. 9,:,/ keys on Bluetooth source
, /buttons on source on CD / USB source
10. DISPLAY,
11. VOL +/- keys, volume adjustment
12. MUTE button, device sound exclusion
13. RANDOM button, random selection of the tracks being played
back
14. CH- / DOWN button, selection of previous memory / scrolling
menu items
15. Key:/ TUN +, track / next radio station
16. ENTER key, confirm selection
17. MONO / ST button, mono / stereo radio listening
18. CH + / UP button, selecting the next memory / scrolling
menu items
19. SLEEP button, activation of the auto-off function
20. X_BASS key, Xbass function activation, bass tone enhan-
cement
21. EQUALIZER button, selection of various preset sound modes
22. SOURCE button, source selection
lithium battery (CR2025).
HCX 10D8 DAB
11