Care And Maintenance; Clean The Scanner Glass; Clean The Transparent Materials Adapter (Tma) - HP Scanjet 7600 Série Guide De L'utilisateur

4

Care and maintenance

Occasional cleaning of your scanner helps ensure optimal performance. The amount of
care necessary depends upon several factors, including the amount of use, the type of
media that is fed through the automatic document feeder (ADF), and the environment.
You should perform routine cleaning as necessary.
For all care and maintenance procedures required for the scanner, please see the Care
and maintenance section for your scanner in the onscreen Help. In HP Director, click
Help, and then select the HP Scanjet 7600 series scanner Help section.
Routine cleaning and maintenance should include cleaning the scanner glass, the
transparent materials adapter (TMA), and the automatic document feeder (ADF).
Caution
can damage the scanner. Before placing an item on the scanner glass, make
sure that the item does not contain wet glue, correction fluid, or other
substances that can be transferred to the glass.

Clean the scanner glass

1 Disconnect the universal serial bus (USB) cable and power cable from the
scanner.
2 Clean the glass by using a soft, lint-free cloth that has been sprayed with a mild
glass cleaner, and dry the glass with a dry, soft, lint-free cloth.
Caution
carbon tetrachloride, all of which can damage the scanner glass. Avoid
isopropyl alcohol because it can leave streaks on the glass.
Do not spray the glass cleaner directly on the glass. If too much glass cleaner is
applied, the cleaner could run to the edges and damage the scanner.
3 When you have finished, reconnect the USB cable and power cable to the
scanner.
Note For instructions about how to clean the underside of the scanner glass, visit
www.hp.com/support.

Clean the transparent materials adapter (TMA)

Clean the TMA with a dry, soft cloth. If necessary, lightly spray the cloth with glass
cleaner and wipe the TMA.
User's manual
Avoid placing items that have sharp edges in the scanner. Doing so
Use only glass cleaner. Avoid abrasives, acetone, benzene, and
17