Sub.d Chronometer Pin-Out - Gorgy Timing LEDI 1S Mode D'emploi

☛
It is also possible to obtain an intermediate time by keeping one of the
☛
When a set time is programmed in either stopwatch or count-down
function, the timer may be stopped and restarted at any moment by pressing
on the "STOP" and " START" buttons, without modifying the set time initially
☛
It is possible to trip a dry contact at zero seconds with the pip option

7.2. SUB.D CHROnOMEtER PIn-OUt

Female SUBD9 pin out on the rear panel
► pin 1 : nC
► pin 2 : GnD
► pin 3 : Switch clock/chrono
► pin 4 : push button "–"
► pin 5 : push button "+"
► pin 6 : push button "proG"
Male SUBD9 pin-out of the chronometer control
► pin 1 : push button "proG"
► pin 2 : push button "+"
► pin 3 : push button "–"
► pin 4 : Switch clock/chrono pin 5 : GnD
► pin 6 : nC
MDE-LEDI1S-2S-1066V1.0
"LAPS" buttons on the timer pressed.
programmed.
(consult us).
1
1
25