Health O Meter 2595KL Mode D'emploi page 7

SET UP
ITEM DESCRIPTION
1 ON/OFF button
2 REWEIGH button
3 ZERO button
4 LBS/KG button
5 BAT indicator
6 ZERO indicator
7 Digital Display 6 Digit LCD
8 LB indicator
9 KG indicator
KG LOCKOUT
The default weighing mode for this scale can be changed from LB/KG to KG only.
scale on and wait for the display to show "0.0", then press and hold the LBS/KG button for 20 seconds
until the scale beeps 6 times. The scale is now locked in the KG mode and the user cannot toggle
between LB and KG. To disable the KG Lockout feature, press and hold the LBS/KG button for another
20 seconds until the scale beeps 6 times, indicating that the user can again toggle between pounds and
kilograms.
Figure 3. Control Panel
Turns scale ON and OFF.
Allows repeated reweighing of person.
Zeros Digital Display prior to weighing. Enables the
cancellation (tare) of weight if some object was placed on the
scale.
Selects kilograms or pounds.
When ON, indicates scale batteries are low. The batteries
should be replaced.
When ON, indicates the scale is stable and ready for use.
Displays weight in kilograms or pounds as shown by the "LB"
or "KG" indicator on the right side of the display. When
REWEIGH button is depressed, display will blink "
patient's weight is determined.
When ON, indicates displaying weight in pounds.
When ON, indicates displaying weight in kilograms.
5
FUNCTION
To change to KG, turn the
------
------ " until