Table des Matières
Publicité
J.
Overlock Cover or Sewing Table
Program numbers 1-9 will always have
the overlock cover attached to the front
cover.
Attach Overlock Cover
The overlock cover protects the loopers.
To attach the overlock cover, slide base
onto front cover and "snap" it into place.
Program number 10 will always have the
sewing table attached to the front cover.
Attach Sewing Table
Detach overlock cover by grasping the tab
with your thumb and index finger. Pull the
tab up slightly and towards you.
NOTE: The movable cutting blade and
stitch width finger will always be
disengaged when the sewing table is
attached.
To install the sewing table, slide table
onto front cover with the tab and notch
fitting snugly into place.
30
Publicité
Table des Matières
