FS S3900 Série Guide De Démarrage Rapide page 10

Connecting the SFP+ Ports
1. Plug the compatible SFP+/SFP transceiver into the SFP+ port.
2. Connect a ber optic cable to the ber transceiver. Then connect the other end of the cable to
another ber device.
WARNING:
Laser beams will cause eye damage. Do not look into bores of optical modules
or optical bers without eye protection.
Connecting the Management Ports
Connecting the Console Port
1. Insert the RJ45 connector into the RJ45 console port on the front of the switch.
2. Connect the DB9 female connector of the console cable to RS-232 serial port on the computer.
9