Charging The Battery - SilverCrest SRR 3.7 B2 Mode D'emploi

Charging the battery

The battery should be charged for at least 60 minutes before fi rst use.
NOTE
► Ensure that the appliance is switched off before charging the
battery.
1) Plug the connector w into the mains connection 0 on the shaver.
2) Plug the power plug q into a socket that is compatible with the
appliance specifi cations. While the battery is charging, the red
charge indicator 9 lights up.
As soon as the battery is fully charged, the green power light 8
♦
fl ashes. Disconnect the appliance from the mains voltage.
The green power light 8 switches off .
♦ Once the battery is fully charged, you can use the appliance for
around 60 minutes without connecting it to the power supply.
If the red indicator light 9 fl ashes, the battery charge level is
♦
too low. Recharge the battery in that case.
SRR 3.7 B2
GB
IE
9