Calibration; The Watch Has 7 Modes Of Operation; Time (Zeit/Time); Time Setting - Crivit 1-LD4487 Mode D'emploi

Masquer les pouces Voir aussi pour 1-LD4487:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

more exact if your movement during training has the same rhythm and speed as
during calibration. Wear the watch on the same wrist during calibration and
during training.

Calibration

Press SEL to start the recording. KALI/CALI and JA/YES will appear on the
display. Press SET to confirm. LAUFEN/RUN will appear on the display. Press SET
to show the distance setting (DST). Press SEL to select the distance and confirm
your setting by pressing SET. Now press SEL to start the calibration. After you are
finished running the calibration distance, press SEL once again. ENDE/DONE or
ERROR will appear on the display. If ERROR appears, the calibration must be
repeated. After successful calibration, perform the calibration for GEHEN/WALK
in the same way as for LAUFEN/RUN.

The watch has 7 modes of operation

Press MODE to select the mode of operation of the watch.
The order of the modes is:
Additionally, each mode of operation has several sub-features.
The sub-features can always be reached by pressing SEL.
- 9 -

Time (ZEIt/TIME)

Repeatedly press MODE to select time mode (ZEIt-1/TIME-1). Press SEL to select
the sub-features of the time mode.
Time, day of the week and seconds <-> time and date.
Press and hold SEL to switch to the second time zone (ZEIt 2 / TIME-2).

Time setting

Press and hold SET. The 12/24 hour time mode indicator will appear. Select the
preferred mode and confirm your selection by pressing SET. Now set the hours,
minutes and seconds by pressing SEL to set each value and pressing SET to
confirm each setting. Now set the year, month and day in the same way and
confirm the setting with SET. Time zone 1 and time zone 2 may be set in the same
way.

Alarm (ALARM)

Repeatedly press MODE to select alarm mode (ALARM). Press SEL to activate or
deactivate the alarm. If the alarm is activated, the alarm symbol
Press and hold SET to enter setting mode. The hours of the alarm time will blink on
the display.
will appear.
- 10 -

Publicité

Table des Matières
loading

Table des Matières