Maintenance; Replacing The Battery; Cleaning; Technical Specifications - SOMFY V100 Notice D'installation Et D'utilisation

Video door phone V100

9.1 Replacing the battery

Equipment is controlled wirelessly thanks to a radio
transmitter built into the monitor which is battery powered.
If wireless control does not work properly, the battery may
be low and should be changed.
To change the battery, open the battery housing at the back
of the monitor (no. 20, page 4) and replace the flat battery
with one of the same type (CR2430-type 3V battery).

9.2 Cleaning

The video entry phone should be cleaned using a so , dry cloth; do not use solvents.
Before cleaning, switch off the equipment.
Indoor monitor
Screen
Settings
Maximum communication time
Power supply
Mounting
Dimensions (w x h x d)
Operating temperature
Power supply
Radio range
5-channel radio
transmitter
Radio frequency
Door station
Camera
Name tag holder and call button
Mounting
Materials
Dimensions (w x h x d)
Settings
Operating temperature
Copyright © 2018 SOMFY ACTIVITES SA. All rights reserved.

9. MAINTENANCE

10. TECHNICAL SPECIFICATIONS

Colour
Dimensions: 4" 10.5 cm
Resolution: 320 x 240 pixels
Bell volume, colours, brightness, speaker volume, bells
2 minutes
100-240 Vac, 50/60 Hz, 0.6 A max.
17 Vdc, 1.1 A
Wall mount
120 x 185 x 22 mm
-10°C to +55°C
3 V type CR2430
200 m
RTS - 433.42 MHz
< 10 mW
CMOS - 62°
White LEDs for night vision
Vision angle with monitor: 55°
Backlit
Surface mounting with rain shield
Aluminium and plastic
95 x 133 x 45 mm
Speaker volume
-20°C to +55°C
EN
14