emergency battery backup box
Four (4) 9 Volt batteries are required to operate the battery backup box and are NOT included.
OVERVIEW
For emergency use only, in case of a power outage.
In the event that the base is stuck in an articulated position during a power
outage — the Battery Backup Box will return the base to a FLAT position.
Batteries are not to be used for normal operation of the base.
Remove the battery pack after the emergency is over, as the system will
continue to draw power from the batteries, even if not in use.
STEP 1
Install the 9 Volt batteries into the provided battery box.
Do not mix brand name batteries.
12
STEP 2
Connect battery pack
Battery Pack
to input power cord
attached to the Head
Motor.
Head Motor
Input
Power Cord