Burg Wächter secuENTRY ENTRY Pincode Guide De Montage page 42

Installation instructions for the secuENTRY cylinder
Please read these Installation Instructions carefully before the assembly and
then store them at a safe place.
Remark:
The base size of the cylinder is 30 mm per side. When shipped, the cylinder
has, on its inner side, the base length of 30mm, with the outer knob
already mounted. The cylinder is provided with an adapter set allowing for
adaptation of the cylinder to door thicknesses of up to 130 mm (67.5 / 62.5)
measured at the central detent bolt). The adapter set provides appropriate
screws for different adapter lengths.
M 4 x 6
M 4 x 12
Fig. 1: Illustration of the adapter and corresponding screws
(1:1 illustration on a separate sheet)
44 | English
M 4 x 16
M 4 x 20
M 4 x 25
M 4 x 30
M 4 x 35
M 4 x 40
secuENTRY
M 4 x 45