Burg Wächter secuENTRY ENTRY Pincode Guide De Montage page 38

Assigning an sE key submenu
Using this function, you have the option to subsequently assign an sE to an
already existing user. For this purpose, proceed as follows:
• Switch on the keypad using the key
• Then press FUNC – "Menu/Code Change" appears
• Scroll using the 2 key until the Administrator menu appears
• Confirm your selection using
• Scroll with the 2 key until "Assign" appears
• Confirm your selection using
• Scroll using the 2 key until "Create User: sE key" appears
• Confirm your selection using
• Enter the administrator code in order to acquire the authorisation for
programming
• Scroll to the user to whom you want to assign an sE and confirm using
• Manipulate the sE Key in the vicinity of the cylinder
• "User.xxxx.KY successfully created" appears in the display
Assigning a transponder submenu
Using this function, you have the option to subsequently assign a
transponder to an already existing user. For this purpose, proceed as follows:
• Switch on the keypad using the key
• Then press FUNC – "Menu/Code Change" appears
• Scroll using the 2 key until the Administrator menu appears
• Confirm your selection using
• Scroll with the 2 key until "Assign" appears
• Confirm your selection using
• Scroll with the 2 key until "Create User: Transponder" appears
• Confirm your selection using
• Enter the administrator code in order to acquire the authorisation for
programming
• Scroll to the user to whom you want to assign a transponder and confirm
using
• Hold the face of the transponder directly in front of the knob and confirm
on the keypad using
• "User.xxxx.TR successfully created" appears in the display
Assigning a finger submenu
Using this function, you have the option to subsequently assign a finger to
an already existing user. For this purpose, proceed as follows:
• Switch on the keypad using the key
• Then press FUNC – "Menu/Code Change" appears
• Scroll using the 2 key until the Administrator menu appears
• Confirm your selection using
• Scroll with the 2 key until "Assign" appears
• Confirm your selection using
• Scroll with the 2 key until "Create User: Fingerprint" appears
• Confirm your selection using
• Enter the administrator code in order to acquire the authorisation for
programming
• Scroll to the user to whom you want to assign a finger and confirm using
• Move the finger to be registered several times centrally over the sensor (the
number of moves is indicated on the display)
• "User.xxxx.FP successfully created" appears in the display
40 | English secuENTRY