Burg Wächter secuENTRY ENTRY Pincode Guide De Montage page 36

• Confirm with
• Enter the code valid so far (existing code) and press
• Enter the new code and confirm it with .
• Repeat your entry and confirm it again with
"Code change accomplished" is displayed after a correct entry
Note: When a cylinder is first started up, additional information on the
current date and time are requested:
• Enter the day (2 digits) and confirm your selection using
• Enter the month (2 digits) and confirm your selection using
• Enter the year (2 digits) and confirm your selection using
• Enter the hour (2 digits) and confirm your selection using
• Enter the minutes (2 digits) and confirm your selection using
"Code change accomplished" is displayed after a correct entry
Sprache / Language
menu Language set up
• Activate the keypad using the
• Then press FUNC, ‚Menu / Code Change' is displayed
• Scroll using the 2 key till reaching the above menu item
• Confirm with
• Use the keys 1 or 2 to scroll until the required language is displayed
• Confirm with
Menu administrator
Various submenus are available under the Administrator menu
Submenu create user with code
• Activate the keypad using the
• Then press FUNC, ‚Menu / Code Change' is displayed
• Scroll using the 2 key till reaching the ‚Administrator menu'
• Confirm with
• Confirm with
• Scroll using the 2 key till reaching the "Create User: Code" item
• Confirm with
• Enter the administrator code in order to acquire the authorisation for
programming
• The next free memory cell is displayed (e.g. USER.0003 CD)
• Enter the 6 digit code and confirm it 2 × with
• "Data has been saved" is displayed
Submenu create user with transponder
• Activate the keypad using the
• Then press FUNC, ‚Menu / Code Change' is displayed
• Scroll using the 2 key till reaching the ‚Administrator menu'
• Confirm with . The "Create User" menu item appears
• Confirm with
• Scroll using the 2 key till reaching the "Create User: Transponder" item
• Confirm with
• Enter the administrator code in order to acquire the authorisation for
programming
• Hold the transponder in front of the knob
• "User.xxxx.TR successfully programmed" appears in the display
38 | English
. The "Create User" menu item appears
key
key
key
secuENTRY