Pilz PNOZ X2.7P Manuel D'utilisation page 8

Masquer les pouces Voir aussi pour PNOZ X2.7P:
Table des Matières

Publicité

Konventioneller thermischer Strom bei gleichzeitiger Belastung mehrerer Kontakte/Conventional thermal current
while loading several contacts/Courant thermique conventionnel en cas de charge sur plusieurs contacts
Anzahl der Kontakte/number of contacts/nombre des contacts
I
bei 24 V AC/DC-Geräten/with 24 V AC/DC units/pour les relais 24 C AC/DC
th
Lebensdauer der Ausgangsrelais/Service Life of Output relays/Durée de vie des relais de sortie
Steckbare Klemmen abziehen
Schraubendreher in Gehäuseaussparung
hinter der Klemme ansetzen und Klemme
heraushebeln.
Klemmen nicht an den Kabeln abziehen!
Abziehen der Klemmen am Beispiel einer
Schraubklemme
Remove plug-in terminals
Insert screwdriver into the cut-out of the
housing behind the terminal and lever the
terminal.
Do not remove the terminals by pulling the
cables!
How to remove the terminals using a screw
terminal as an example
- 8 -
3
2
1
4,5 A
6 A
6 A
Démonter les borniers débrochables
Placer un tournevis derrière les bornes et
sortir le bornier.
Ne pas retirer les borniers en tirant sur les
câbles !
Démontage d'un bornier à vis

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pnoz x2.8p

Table des Matières