Output; Call Allocation - Abus Terxon PSTN Instructions D'installation

Press to confirm your selection.
Press to end data entry.

10.6 Output

A reaction type can be allocated to a transistor output using this menu
option. The transistor output switches in one of the following states:
-
-
-
-
Enter your programming code (default: 1234). The following message
is shown in the display:
Press . The display shows the following:
Press to display the current output type:
Press the
Press to confirm your selection.
Press to end data entry.

10.7 Call allocation

Voice messages A-D can be allocated individually or to all telephone
numbers.
ACTIVE: Triggering of an input.
SUCCESS: Transmission and confirmation of an
alarm call.
FAILED: Unsuccessful transmission of an alarm call.
OFF: Output not used.
key to select the other output types.
READY
OUTPUT-
ACTIVE
SUCCESS
54