Displays; Normal Mode; Test Mode - Abus Terxon PSTN Instructions D'installation

11. Displays

11.1 Normal mode

Display
PLEASE
RECORD
SD1
ABORTED

11.2 Test mode

Display
RINGING
ENGAGED
UNOBTAIN
SENT OK
NO REPLY
Explanation
If the dialer was put into operation for the first
time, then a
necessary. The telephone numbers and
messages must then be programmed.
This is the display in standby mode. The
display appears as soon as at least one
telephone number
and one voice message are programmed. It
also appears during an alarm call.
The alarm call was cancelled by the user
during the transmission attempt by the dialer.
Explanation
The device has recognised a dial tone.
The recipient line is engaged. The dialer
makes a new connection attempt.
Message transmission could not be made.
The alarm was transmitted successfully and
acknowledged by the recipient.
The alarm call was not answered or not
acknowledged by the recipient.
61
factory settings reset is