tau T-ONE Manuel D'emploi Et D'entretien page 23

Manufacturer:
Address:
Declares under its sole responsibility, that the product:
designed for automatic movement of:
for use in a:
complete with:
Model:
Type:
Serial number:
Commercial name:
Has been produced for incorporation on an access point (sliding gate) of for assembly with other devices used to move such an access
point, to constitute a machine in accordance with the Machinery Directive 2006/42/EC.
Also declares that this product complies with the essential safety requirements of the following EEC directives:
- 2014/35/EU Low Voltage Directive
- 2014/30/EU Electromagnetic Compatibility Directive
and, where required, with the Directive:
- 2014/53/EU Radio equipment and telecommunications terminal equipment
Also declares that it is not permitted to start up the machine until the machine in which it is incorporated or of which it will be a com-
ponent has been identified with the relative declaration of conformity with the provisions of Directive 2006/42/EC.
The following standards and technical specifications are applied:
EN 61000-6-2; EN 61000-6-3;
EN 300 220-2 V2.4.1; EN 12453:2000; EN 12445:2000; EN 60335-2-103
The manufacturer undertakes to provide, on sufficiently motivated request by national authorities, all information pertinent to the quasi-
machinery.
Sandrigo, 18/07/2017
Name and address of person authorised to draw up all pertinent technical documentation:
Loris Virgilio Danieli - via E. Fermi, 43 - 36066 Sandrigo (Vi) Italy
MANUFACTURER'S DECLARATION OF INCORPORATION
(in accordance with European Directive 2006/42/EC App. II.B)
EN 60335-1;
Electromechanical actuator
Sliding Gates
Residential / Communities
Electronic control unit and radioreceiver
T-ONE
T-ONE3B / T-ONE5B / T-ONE8BR / T-ONE10B / T-ONE5 /
T-ONE8 / T-ONEXL
SEE SILVER LABEL
AUTOMATION FOR SLIDING GATES
ETSI EN 301 489-1 V1.9.2;
Legal Representative
_________________________________________
Loris Virgilio Danieli
23
TAU S.r.l.
Via E. Fermi, 43
36066 Sandrigo (Vi)
ITALY
ETSI EN 301 489-3 V1.6.1;