SOLIS EASYVAC PRO Mode D'emploi page 68

Anleitung_SOLIS_Vakuumiergera?t_DE-FR-IT-GB-NL:2011
I I . VA C U U M I N G A N D S E A L I N G A F I L L E D B A G
68
1. Insert the power plug into a suitable socket.
Fig. 1
2. Place the fresh food into the bag. Please use the orig-
inal SOLIS-Vacuum Bags or Vacuum Foil exclusively to
avoid damage to the appliance and to ensure best
results.
3. Clean the open end of the bag inside and out, then
smooth it flat. The end must free of dust and wrin-
kles.
4. Place the open bag end in the vacuum chamber
Fig. 2
Caution: The air-extraction opening
covered by the bag end.
Fig. 1
5. Press down the cover with both hands at both sides
until you hear a "click" at both sides. Now the appli-
ance is locked shut.
Fig. 2
6. Check the status of the "FOOD" and "VACUUM
Fig. 3
PRESSURE" buttons by refering to the LED indicator
lights.
With the "FOOD" button you can choose between
"Dry" and "Moist", depending on whether the food
is dry (Choose "Dry" setting) or contains a lot
of moisture (Choose "Moist" setting). With the
"VACUUM PRESSURE" button you can choose if
the vacuum pressure should be at the normal level
("Normal") or if it should be lower because the food
Fig. 4
is pressure sensitive ("Gentle").
7. Then press the "VACUUM+SEAL" button, now the
appliance will vacuum and seal the bag. During the
vacuum-programme the red indicator light next to
"VACUUM+SEAL" lights up. Once the appliance
begins sealing, the blue indicator light next to "SEAL"
lights up.
Fig. 3
Fig. 4 a Note: The appliance produces a fairly high vacuum
pressure in the bag. If this pressure might crush frag-
ile food then observe the vacuum pressure in the bag
during vacuuming. When the desired vacuum is
achieved, press the "SEAL" button. The appliance
switches off the motor pump from vacuuming and
begins sealing the bag.
02.11.2011 11:31 Uhr
≥
must not be
Seite 68
µ
.