SOLIS EASYVAC PRO Mode D'emploi page 67

Anleitung_SOLIS_Vakuumiergera?t_DE-FR-IT-GB-NL:2011
L
F I R S T U S E
I . S E A L I N G A B A G F R O M
VA C U U M F I L M
1. Insert the plug into a suitable socket.
2. Cut a suitable bag length from the film.
Fig. 1
3. Place the open bag end on the contact pressure rub-
¥
ber of the open appliance. The bag end should
not extend into the vacuum chamber
Fig. 2
4. Close the lid of the appliance and press down at both
sides simultaniously until you hear a "click" at both
sides. The cover is now locked by the locking catches.
Fig. 3
5. Press the "SEAL" button
of the bag. The blue indicator light lights up and goes
out again when the sealing process is finished.
Fig. 4
6. Press both release buttons
tor light has gone out, the cover opens and you can
take out the bag. Now the end of the bag is sealed
and you can fill it.
Fig. 5
µ
.
™
in order to seal the end
≤
, once the blue indica-
02.11.2011 11:31 Uhr Seite 67
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
67