Cash Card; Standby Function; Optical Interface; Default Language - Schulthess Spirit TopLine TWP 6707 Mode D'emploi

Standby function (ex factory ON)
Select «Extended basic settings»!
When the standby function is switched on, the controls
switch off when no drying programme is running in
energy saving mode. All displays are dark.
Optical interface (ex factory OFF)
Select «Extended basic settings»!
If the optical interface (SCS) is switched on, customer
services can communicate with the machine by PC.
Default language (ex factory GERMAN)
Select «Extended basic settings»!
If another language is temporarily selected via the keys
and , 4 minutes after programme end, in standby
mode or after a long standstill, the setting reverts back to
the default language.
56

Cash Card

Inserting the Cash Card

Insert the Cash Card with the p symbol facing upwards.
In the display will appear in succession the amount stored
on the Cash Card, the amount on account which will be
deducted, as well as the new Cash Card balance. Any
remaining credit balance stored in the appliance will be
set off.
If the amount available on the Cash Card is not sufficient
for the wash, a signal will sound and the remaining
amount will appear flashing in the display. The difference
can be settled with a second Cash Card.

Removing the Cash Card

Selecting and starting the drying programme
u Select the drying programme
u Select the additional functions
u Start the programme

Displays during the programme sequence

During the drying programme, the remaining time and
the remaining credit balance are displayed alternately.

Programme end

When the drying programme is completed, the remaining
amount is stored in the appliance under the appropriate
Cash Card. This remaining credit balance will be set off
at the next washing cycle. The programme end is displayed
by the display value 00:00h as well as the flashing control
lamp «Open door».

Re-crediting

Re-crediting of the remaining credit balance is best made
at the end of a washing day.
u Insert the Cash Card. The amount stored on the Cash
Card will appear in the digital display.
u Re-credit by pressing the fast run button. In the digital
display will appear in sequence the display the remaining
credit balance which will be credited, as well as the new
Cash Card balance.
u Remove the Cash Card.
Re-crediting can always be made only to that Cash Card
from which the amount was originally deducted.
In the case of active child safety device:
+
Remaining value transfer
If there is not an adequately high remaining amount
available on a Cash Card to pay for the booking on
account, this will be displayed by the whistle signal and
by the flashing display with the message saldo to small.
By inserting a second Cash Card, the difference can be
paid.