Machine Maintenance; Daily Maintenance - Tennant T2 Manuel Opérateur

MACHINE MAINTENANCE

To keep the machine in good working condition, follow
the machine maintenance procedures.
WARNING: Electrical Hazard. Disconnect
Battery Cables Before Servicing Machine.

DAILY MAINTENANCE

1. Drain and rinse out the recovery tank (Figure 34).
2. Remove the debris tray and empty (Figure 35)
3. Remove and clean the float shut--off screen located
in the recovery tank (Figure 36).
Tennant T2 (08- -11)
FIG. 34
FIG. 35
FIG. 36
4. Drain the solution tank (Figure 37)
5. Remove the pad/brush and clean. Rotate pad or
replace when worn (Figure 38).
6. Wipe the squeegee blades clean (Figure 39).
When machine is not in use, raise squeegee
assembly off floor or hang on storage bracket.
ENGLISH
FIG. 37
FIG. 38
FIG. 39
15