Positionnement Des Chemins De Roulement Et Connexion Hydraulique En Position Standard - Ravaglioli RAV1450N Traduction Des Instructions Originales

Table des Matières

Publicité

5.3
POSIZIONAMENTO DELLE PEDANE E COLLEGAMENTO DELL'IMPIANTO IN POSIZIONE STANDARD
• Posizionare le pedane (1) e la centralina (2) alla giusta distanza (fig. 9).
5.3
POSITIONING PLATFORMS AND HYDRAULIC CONNECTION OF THE SYSTEM IN STANDARD POSITION
• Position the platforms (1) and the control unit (2) at the correct distance (fig. 9).
5.3
POSITIONIERUNG DER FAHRSCHIENEN UND HYDRAULIKANSCHLUSS IN DER STANDARDPOSITION
• Die Fahrschienen (1) und die Anlage (2) auf die richtige Distanz (Abb. 9) bringen.
5.3

POSITIONNEMENT DES CHEMINS DE ROULEMENT ET CONNEXION HYDRAULIQUE EN POSITION STANDARD

• Positionner les chemins de roulement (1) et la centrale (2) à la distance correcte (fig. 9).
5.3
COLOCACIÓN DE LAS PLATAFORMAS Y CONEXIÓN HIDRÁULICA EN POSICIÓN ESTÁNDAR
• Colocar las plataformas (1) y la centralita (2) a la distancia correcta (fig. 9).
0575-M010-1
5
21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rav1450p

Table des Matières