TFA 35.1088 Instructions D'utilisation page 8

TFA_No_35.1088_Anleit_neu 12.03.2009
Meteotime Star
– Weather Forecast Center
• Then, you are able to press [ ] or [
confirm. You are able to select maximum 5 cities to display. If you want to add more cities, then
memfull
will be shown in the information window.
Press [ TEST √ ] key to remove the √, and this city is removed out of your list of preference cities you
•
have selected.
exit
• Press [ SET ] key to quit, and will be shown in the information window.
REMARK: If you haven't chosen a city in the first time you power up the unit, the product will default
select Frankfurt am Main as your selected city.
4. How to operate
4.1 Switch CITY SUNRISE & SUNSET TIME
• Press [ SET ] to switch from the display of the City to Sunrise & Sunset time OR Time & Date for your
selected city.
SUNRISE
frankfurt.M 6:19
[ SET ]
4.2 Switch INDOOR / OUTDOOR TEMPERATURE AND HUMITIDY READING
• Press [ IN/OUT ] keys to switch the reading of indoor or outdoor temperature and humidity
reading.
12. 48
7°C %
[ IN/OUT ]
• Press [ MEM ] key to read the record of the maximum and minimum temperature
• Press and hold [ MEM ] key to CLEAR the record of the maximum and minimum temperature
4.3 Switch DAY WEATHER INFORMATION
• The unit is preset to show DAY-WEATHER after sunrise time, and NIGHT-WEATHER after SUNSET
time. If the NIGHT-WEATHER is currently shown, the user can press the [ DAY/NIGHT ] button to see
the DAY-Weather (for 10-second period) or vice versa.
4.4 Display of more cities
• If you have selected more than one city, for example Frankfurt am Main, Köln and Münster in your
desired city list, then you are able to press [
the CITY NAME (Press [ SET ] until it displays the city name).
frankfurt.M köln
[ / ]
• When you selected another city, the sunrise and sunset time and weather information will be of
this selected city.
4.5 How to personalize a city name
• Press and Hold [ SET ] for 3 seconds. In the information window,
[ ] or [ ] key to select the country, for example:
• Press [ SET ] key to confirm the Country and the information window will show
• Then, press [ ] or [ ] key to select the city, and the city name will be shown in the information
frankfurt.M
window such as , and you would like to enter a new city name which is near the
region of Frankfurt am Main.
• Press the [ MEM ] key; a cursor flashes on the first position of the information window
14
14:25 Uhr Seite 8
] key to select more cities, and then press [ TEST √ ] key to
TIME & DATE
SUNSET D M
19:38 14:23 26 5
[ SET ]
3. 23
2°C %
NIGHT WEATHER INFORMATION
] or [ ] key when the information window shows
münster
[ / ]
country
is shown, and then press
d/ger
for Germany.
city
.
Meteotime Star
– Weather Forecast Center
• Use the following keys for data entry:
KEY Function
' ' or' ' Selection of a letter
SET <1> Accept the selected letter and jumps to the next position.
OR
<2> If you have not entered any letter (in other words, if only the cursor is
flashing at the last position), confirm the entry with this key and your place
will also be included in the memory with immediate effect.
TEST One position back in the data entry process
** The place that you have selected to enter your own description will still exist under its own name.
• Press [ SET ] key to confirm and exit
4.6 Critical weather information
• The Meteotime weather signal contains critical weather information such as gust, frozen rain,
heavy snow, thunder, strong UV, dense fog etc. for today and the coming three days.
• A critical weather alert signal will be turned on in case that day has critical weather that the
user must know.
• Sometimes there is more than one critical weather information in the 4-days. Press [ DAY/NIGHT ]
key to read the critical weather information one by one. The special icon of the day will flash when
you read the information.
• Press [ SET ] key to go back to the display of CITY
• If no key is pressed, the critical weather information will toggle to make sure you are aware of the
critical weather details.
5. Positioning of transmitter
• Choose a shady and dry position for the transmitter. ( Direct sunshine falsifies the measurement
and continuous humidity strains the electronic components needlessly)
• Check the transmission of the signal from the transmitter to the display unit (transmission range
30 m free field). Within ferro-concrete rooms (basements, superstructures), the received signal is
naturally weakened.
• If necessary choose another position for transmitter and/or display unit.
• Fix the transmitter by using the wall mount hole.
6. Intended usage, exclusion of warranty, and safety information
• This weather station is intended for private usage as an indicator for future weather. The forecasts
of this device are to be used as orientation values and do not represent absolute, precise forecasts.
• The manufacturer or distributor of this weather station assumes no responsibility for incorrect
values or any results that may occur because of these values.
• The weather station is not intended for medical purposes or for the information to the public.
• The manufacturer or distributor has no influence on the transferred weather data or forecasts.
• The capabilities of the weather station depend on the operational functionality of the transmission
media, which the manufacturer or distributor has no influence on. Failures in the transmission
media cannot be ruled out.
• This device is not a toy and contains breakable and small parts. Install the device out of the reach
of children.
• Improper handling or unauthorized opening of the device voids the guarantee.
• These instructions are not to be reproduced in whole or in part without the written authorization
of TFA Dostmann.
SUNRISE & SUNSET TIME TIME & DATE.
15