Internal Calls; Further Functions; Muting Function; Registering Handsets - switel DET087 Série Mode D'emploi

Internal calls

36
Making an internal call
3 sec I, ë e.g. 2.
There must be two or more handsets registered on the base station.
Forwarding external calls internally / Conference calls
You are conversing with in an external caller: 3 sec I, ë e.g. 2.
After the internal party has answered, transfer the call by pressing the ‚ button. To start a
conference call, press the # button after the internal party called has answered.
If the handset called does not answer, take the external call back by pressing the
I button.

Further functions

Function
Answering machine
Switch the handset on/off
Key lock on
Key lock off
Receiver volume (1−5)
Ringing melody volume
Muting function (handset) on/off
Locate handset (paging)

Muting function

During a call, you can switch the handset microphone off (muting) so that the caller can no longer
hear you.
Talk time display
The duration of the call is displayed in hrs., min. and sec. during a call.

Registering handsets

If the handset is not registered on the base station, the
play.
To register the handset, press the ‘ button on the base station for 3 seconds and then pro-
ceed as follows:
5 sec. ”, - , PI- , ë 0000, ”.
To register a handset from a different manufacturer, refer to the operating manual supplied with
the respective handset. The four−digit PIN for your base station is 0000.
Up to five handsets can be registered on your base station. Your handset can only
be registered on one base station at any particular time.
Button sequence
¢
3 sec ‚
3 sec 
, 
ƒ, y/z
y/z while phone is ringing
— during call
‘ on the base station
and
Telephoning
icons flash in the dis-
57