• BMT-20-S
Tube for grinding with stainless steel balls 20 ml,
with pierceable membrane
• BMT-20-S-M-gamma Tube for grinding with stainless steel balls,
20 ml, γ-sterilized, with pierceable membrane
• BMT-50-S
Tube for grinding with stainless steel balls 50 ml
• BMT-50-S-M
Tube for grinding with stainless steel balls 50 ml,
with pierceable membrane
• BMT-50-S-M-gamma Tube for grinding with stainless steel balls 50 ml,
γ-sterilized, with pierceable membrane
• BMT-20-G
Tube for grinding with glass balls 20 ml,
with pierceable membrane
• BMT-50-G
Tube for grinding with glass balls 50 ml
• BMT-50-G-M
Tube for grinding with glass balls 50 ml,
with pierceable membrane
• ST-2-adapter
Adapter UTTD - ST-2
•TC-20-M
Tube cover 20 ml
with pierceable membrane
• TC-50
Tube cover 50 ml
• TC-50-M
Tube cover 50 ml
with pierceable membrane
• Glass balls
• Stainless steel balls
10
Maintenance
The drive unit is maintenance-free but not immune from wear. The
carbon brushes of the motor wear down over the time.
For cleaning disconnect the main plug.
Only use cleansing agents which have been recommended by IKA
Dirt
Cleaning agent
Dyes
isopropyl alcohol
Construction materials
water containing tenside/isopropyl alcohol
Cosmetics
water containing tenside/isopropyl alcohol
Foodstuffs
water containing tenside
Fuels
water containing tenside
For materials which are not listed, please request information from
IKA
application support.
®
Wear protective gloves during cleaning the instruments.
Electrical instruments may not be placed in the cleansing agent for
the purpose of cleaning.
Do not allow moisture to get into the instrument when cleaning.
Before using another than the recommended method for cleaning
or decontamination, the user must ascertain with IKA
method does not destroy the instrument.
Spare parts order
When ordering spare parts, please give:
- machine type
- manufacturing number, see type plate
- item and designation of the spare part, see www.ika.com,
spare parts diagram and spare parts list.
®
.
®
that this
16