Pelgrim OVM216GLS Notice D'utilisation page 74

Masquer les pouces Voir aussi pour OVM216GLS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USE
1.
Set the clock to standby operation by depressing the clock button until the oven symbol
appears in the display.
2.
Select a temperature with the temperature knob and an oven function with the oven
function knob.
3.
Press the clock button several times until 'dur' appears in the display.
4.
Use the '-' and '+' buttons to set a cooking time (maximum 10 hours). First set the hours
(U) and confirm using the clock button. Now set the minutes (M).
5.
Press the clock button to confirm the set time.
The time appears in the display. The 'auto' symbol light up.
6.
Press the clock button again several times until 'End' appears in the display.
7.
Use the '-' and '+' buttons to set an end time. First set the hours (U) and confirm using the
clock button. Now set the minutes (M).
8.
Press the clock button to confirm the set time.
The time appears in the display.
The oven symbol will disappear and the 'auto' symbol stays lit.
An end time can be selected that is 23:59 hrs after the time at which the cooking time was set.
The oven will start automatically at the end time minus the cooking time and will stop at the set
end time.
When the set end time has been reached, a signal will sound and the oven will switch
off automatically. 'Auto' symbol flashes in the display.
9.
Switch off the oven by turning the oven knobs to the '0' setting.
10. Press any button (for at least 3 seconds) to switch off the beep.
The 'auto' symbol disappears from the display.
Switch off the kitchen timer function by pressing the clock button. Then again press
and hold the clock button until the Auto symbol disappears from the display.
EN 14

Publicité

Table des Matières
loading

Table des Matières