Key To Symbols; Description Of The Appliance And Its Accessories; Preparation - Imetec P8401 Mode D'emploi

Caution/Warning/Danger
Caution! Hot surface
Position with 1 dot.
Suitable for ironing silk and
synthetic fabrics such as:
viscose, polyester
Position with 3 dots.
Suitable for ironing fabrics
such as cotton and linen
Max fill-up level
ON position
OFF position

DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES

Refer to the illustrated guide on page I to check that your appliance is complete with all accessories.
1. Water fill cover
2. Filter flap
3. Reservoir
4. Cable recess
5. ON/OFF switch
6. Technical data
7. Power cable with plug
8. Filter change LED
9. Filter change reset button
INSERTING THE ANTI-SCALE FILTER
NOTE: When using for the first time or whenever the product signals the need to replace
the anti-scale filter (18).
NOTE: If the anti-scale filter (18) is not inserted or inserted incorrectly, the product will
not work.
Open the filter flap (2).
Remove the anti-scale filter (18) from the housing.
NOTE: The anti-scale filter (18) used may contain drops of water.
Place a cloth under the anti-scale filter to prevent these drops falling on to the floor.

KEY TO SYMBOLS

Min
10. Steam adjustment knob
11. Steam ready LED
12. Iron stand
13. Temperature adjustment knob
14. Mono-tube
15. Plate temperature LED
16. Plate
17. Steam request button
18. Anti scale filter (x3)

PREPARATION

Prohibition
Information
Position with 2 dots.
Suitable for ironing fabrics
such as wool
Minimum temperature
Water fill
Steam ready/steam
14
EN