Transport Belts; Insufficient Envelope Opening; Repairs; Product Information - Pitney Bowes DL250 Manuel D'utilisation

Troubleshooting

Transport Belts

Contact your machine supplier if the motor is running but the transport Belts are
not.
We recommend that you clean the belts regularly to ensure efficient operation.

Insufficient Envelope Opening

Ensure your cutting adjustment is sufficient. Correct cutting width by turning the
adjustment wheel.
Ensure that the mail is pre-sorted and collated correctly and that it is placed on the
Feed Deck properly.
If problem persists, contact your machine supplier, the blade may be damaged.

Repairs

Contact your machine supplier for service, maintenance or repair. Any repairs
must be performed by a skilled technician.
SDC2008A DL250 Operator Guide

Product Information

Product Information

Technical Data

Maximum speed: .................................. up to 420 openings per minute
Maximum envelope thickness: ............. 10 mm
Cutting width: ........................................ variable (0,8 – 4 mm)
Envelope feeding DL 250: .................... with 3 belts
Dimensions (L/W/H): ............................. 84,5 x 29 x 21,5 cm
Net weight of the letter opener: ............. 9 kg
Gross weight: ....................................... 13kg
Voltage: ................................................240V 2,5A

CE Statement

The manufacturer declares that this letter opener DL 250 corresponds to
the standards and directives required.
The products are tested in a typical configuration.
EN
<< Return to Contents