Cleaning The Brew Group - Saeco Primea Touch Plus Mode D'emploi

CLEANING THE BREW GROUP

The brew group must be cleaned at least once a week.
Wash the brew group with warm water.
WARNING! Do not wash the brew group with detergents that can compromise its correct operation. Do
not wash in the dishwasher.
1
Press to open the service door.
4
Wash the upper fi lter with running
water.
7
Lubricate the guides and the
o-ring of the brew group, only
with the supplied lubricant.
2
Press the PUSH button to remove
the brew group.
5
Make sure the group is ready to
be put back in. The two
references must align.
8
Reinsert the brew group by
pressing the PUSH button and
sliding into place.
3
Wash any coffee residues from
the brew group.
6
Make sure that the components
are in the correct position.
9
Close the service door and insert
the dreg drawer.
39