Cleaning The Brew Group - Saeco Odea Go Mode D'emploi

CLEANING THE BREW GROUP

The Brew Group must be cleaned at least once a week. Before removing the Brew Group, remove the
Group, insert the grounds drawer and close the service door.
1
Press the "PUSH" button to
remove the group.
4
Make sure the components are in
the correct position.
The hook shown must be in the
correct position; to check its
button.
7
Insert the grounds drawer and
close the service door.
2
Wash the Brew Group with
carefully.
5
The lever on the rear part of the
group must be in contact with
the Brew Group base.
3
Make sure the group is in rest
position; the two references must
match.
6
Insert the washed and dried Brew
Group.
DO NOT PRESS THE "PUSH"
BUTTON.
17