Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
20
PROGRAMMING THE MACHINE
"WATER HARDNESS" MENU
To adjust the level of water hardness, shown on a scale of 1 to 4. The machine is preset at a hardness value of 3.
1
Immerse the water hardness strip included in
the welcome pack for one second in water.
Press the "water hardness" button.
water
hardness
go back
"RINSE" MENU
To clean the internal tubes in order to guarantee that the beverages are dispensed only with fresh water.
In this menu you can:
rinsing
off
go back
deactivate the rinse cycle.
Check the value.
water
hardness
restore
save
back to
standars
settings
menu
values
rinsing
on
restore
save
back to
standars
settings
menu
values
2
1
2
The test can be used only for
one measurement.
Set the water hardness on the machine by
pressing + or -
Note: This rinse cycle is
performed every time the
machine is turned on when it
is cool.
activate the rinse cycle.
3
4
Publicité
Chapitres
Table des Matières
