Cleaning The Mesh Filters In The Water Supply Hose - Whirlpool AWG812/PRO Consignes D'installation, Utilisation Et Sécurité

CLEANING THE MESH FILTERS
IN THE WATER SUPPLY HOSE
1.
Close water tap and screw off the inlet hose .
1
2
2.
Clean the mesh filter at the hose's end
carefully with a fine brush .
3.
Now unscrew the inlet hose on the back of the
washing machine by hand .
Pull out the mesh filter from the valve on the back
of the washing machine with pliers and carefully
clean it .
206
4.
Insert the mesh filter again . Connect the inlet
hose to water tap and washing machine again . Do
not use a tool to connect the inlet hose . Open the
water tap and check that all connections are tight .
2
1