Checking The Water Supply Hose - Whirlpool AWG812/PRO Consignes D'installation, Utilisation Et Sécurité

CHECKING THE WATER
SUPPLY HOSE
Check the inlet hose regularly for brittleness
and cracks . If damaged, replace it by a new hose
available through our After-Sales Service or your
specialist dealer .
Depending on the hose type:
If the inlet hose has a transparent coating,
periodically check if the colour intensifies locally .
If yes, the hose may have a leak and should be
replaced .
For water stop hoses: check the small safety valve
inspection window (see arrow) . If it is red, the water
stop function was triggered, and the hose must be
replaced by a new one .
For unscrewing this hose, press the release button
(if available) while unscrewing the hose .
EN
205