Associated Documents; Safety Instructions; Product Description; Functional Description - Rittal DK 7030.150 Notice D'installation Et D'utilisation Succincte

Détecteur de pression différentielle analogique cmc iii
Table des Matières

Publicité

EN
1
Notes on documentation
This installation and short user guide is intended for experienced trained specialists and contains only
the most important information concerning the assembly, installation and function of the CMC III Ana-
logue Differential Pressure Sensor (subsequently called differential pressure sensor).
1.1

Associated documents

CMC III Analogue Differential Pressure Sensor assembly and operating instructions.
It is available at www.rittal.com and contains the complete application-relevant information and techni-
cal data for the differential pressure sensor with regard to:
– Further assembly possibilities
– Functions
– Configuration possibilities
– Detailed operating instructions
– Troubleshooting
2

Safety instructions

– Assembly and installation of the differential pressure sensor may only be performed by experienced
trained specialists.
– The differential pressure sensor housing must not be opened.
– The differential pressure sensor must not come in contact with water, aggressive or inflammable gas-
es and vapours.
– The differential pressure sensor must only be operated within the specified environmental conditions
(see section 3.4).
3

Product description

3.1

Functional description

The differential pressure sensor is used to monitor the differential pressure for climate control applica-
tions, e. g. raised floor cooling, cold aisle housing, etc. It supplies the measured pressure values to the
connected CMC III PU. The differential pressure sensor has an identification that allows it to be detect-
ed automatically by the CMC III PU.
3.2

Proper use

The CMC III Analogue Differential Pressure Sensor is used only to monitor the differential pressure for
climate control applications with the supplied air hose, e. g. in a cold aisle. It may be used only together
with the CMC III PU. Any other use is not permitted.
3.3

Scope of delivery

– CMC III Analogue Differential Pressure Sensor
– Accessories supplied loose (fig. 1)
– Installation and Short User Guide
Rittal CMC III Analogue Differential Pressure Sensor
Notes on documentation, Safety instructions, Product description
EN
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cmc iii

Table des Matières