Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1
Notes on documentation
This installation and short user guide is intended for experienced trained specialists and contains
only the most important information concerning the assembly, installation and function of the CMC III
transponder reader VX (subsequently called transponder reader).
1.1
Other applicable documents
CMC III transponder reader VX assembly, installation and user guide.
It is available at www.rittal.com and contains the complete application-relevant information and tech-
nical data for the transponder reader unit with regard to:
– Further assembly possibilities
– Functions
– Configuration possibilities
– Detailed operating instructions
– Troubleshooting
2
Safety instructions
– Assembly and installation of the transponder reader may only be performed by experienced trained
specialists.
– The transponder reader housing must not be opened.
– The transponder reader must not come in contact with water, aggressive or inflammable gases and
vapours.
– The transponder reader must only be operated within the specified environmental conditions (see
section 3.4).
3
Product description
3.1
Functional description
The transponder reader is used to release enclosure or room doors when a transponder card is held
without contact in its vicinity. Several Mifare, Legic, HID, FeliCa and NFC branded cards are readable
using the Android app and Legic Prime on request. The card UID is checked in the connected CMC
III PU or PU Compact and, if validated, an appropriate door release initiated. The transponder reader
has an identification that allows it to be detected automatically by the CMC III PU or PU Compact.
3.2
Proper use
The CMC III transponder reader VX is used only for the door release using transponder cards. It may
be used only together with the CMC III PU or PU Compact and the Access Control (DK 7030.202) or
DCM (DK 7030.501). Any other use is not permitted.
3.3
Scope of delivery
– CMC III transponder reader VX
– Accessories supplied loose (fig. 1)
– Installation and Short User Guide
Rittal CMC III transponder reader VX
Notes on documentation, Safety instructions, Product description
EN
7
Publicité
Table des Matières
