Important Information; Introduction; Disclaimers - Munchkin vibe MKSA0511-011 Notice D'installation

Important Information

INTRODUCTION

Thank you for choosing a premium safety gate from Munchkin to protect
your family.
These gates stay in place by creating pressure between two opposing surfaces.
Do not use this gate in any location without using all 4 wall cups, sticky
pads, and screws provided when installing the gate. Please inspect your gate
immediately. If you see any damage, do not attempt installation. Check page 15
of this instruction booklet for information on damaged products.
Assemble the gate away from small children. Some of the parts may present a
choking hazard when loose.
There is a gap between your gate frame and handle.
This is not a defect. This gap will close once your gate
is properly installed.

DISCLAIMERS

Any safety gate which has been subjected to misuse, abuse, abnormal use,
excessive wear and tear, improper assembly, negligence, environmental
exposure, accident or alteration of the gate, as well as removal or alteration of
its serial number, invalidates any and all claims against the manufacturer. Any
damage to property during installation is the sole responsibility of the end user.
WARNING:
• Adult assembly required.
• Install according to manufacturer's instructions.
• Use only with the locking mechanism securely engaged.
• Never use with a child able to climb over or dislodge the gate
or enclosure.
4
• To prevent serious injury or death, securely install gate or
enclosure and use according to manufacturer's instructions.
• Stop using gate if any parts are missing or become damaged.
• Periodically check all fasteners to be sure they are tight
and secure.
• This product is intended for use with children age 6 months
to 24 months.
• This product will not necessarily prevent all accidents. Never
leave a child unattended.
• Safety barrier complies with ASTM F1004.
FOR LUNA SAFETY GATE ONLY:
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium, lithium-ion) batteries.
• Insert batteries in the correct polarity position.
• Remove batteries during long periods of non-use. Always
remove exhausted batteries from product. Dispose
batteries properly.
• Use caution when opening battery compartment as some
batteries may leak,explode or catch on fi re.
• Please recycle used batteries safely and according to
local laws.
Important Information
5