Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Special features connection
Please revert to the schematic diagrams fitted with the bank for exact label of the wires.
3.4.5.3.
Master (PIL) APCR wiring
The cable is divided in two main parts: the step control (to the PF controller) and special features (to a
dedicated terminal).
Special features connection
Please revert to the schematic diagrams fitted with the bank for exact labels of the wires.
After wiring, please check that the cable is properly fixed in the bank.
3.4.6.
Earth connection
The APCL earth connections are made by means of a stud (∅ M6). This one is welded inside the APCL in
the lower left corner. It only remains to connect the earth wire if the power cable is fitted with it. For the
APCM and APCR, the earth connection can be made by means of one of the two stud (∅ M8) located in the
upper and lower left corners.
APC - Chapter 3. Installation
Special features connection
(terminal labels: X, 15, A)
Figure 3.12. Master APCM2 wiring
Special features connection
(terminal labels: X, 15, A)
Figure 3.13. Master APCR wiring
Figure 3.14. Earth connection
PF controller connection
PF controller connection
19
Publicité
Table des Matières
