ABB APC Instructions D'installation, D'utilisation Et D'entretien page 18

Depending on the type of the bank, pass the cable inside the right hand side raceway (APCL2 and APCR) or
fix it along the central plate (APCM2). Please refer to
APCL2
3.4.5.1. Master (PIL) APCL2 wiring
The cable is divided in three main parts: the DC supply for the fan (to DC supply unit), the step control (to the
PF controller) and special features (to a dedicated terminal).
Special features connection
(terminal labels: X, 15)
Please revert to the schematic diagrams fitted with the bank for exact label of the wires.
3.4.5.2. Master (PIL) APCM2 wiring
The cable is divided in two main parts: the step control (to the PF controller) and special features (to a
dedicated terminal).
18
Figure 3.10.
APCM2
Figure 3.10. Interconnection cable location
DC supply connection
Figure 3.11. Master APCL2 wiring
APCR
PF controller connection
APC - Chapter 3. Installation