Siemens SINUMERIK 840D sl Manuel De Mise En Service page 117

--- 04.10.2006 09:35:40 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Overview (program / work piece)" (Id 35100, Appl.
3)
--- 04.10.2006 09:35:40 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Dummy-Window" (Id 1000, Appl. 3)
--- 04.10.2006 09:35:40 HMI-Emb 0 KEY_PRESSED
Key pressed: KEY_F5 (RELEASED) (e0/3f)
--- 04.10.2006 09:35:39 HMI-Emb 0 KEY_PRESSED
Key pressed: KEY_F5 ( 0/3f)
--- 04.10.2006 09:35:38 <default> 0 ALARM
NCK-Alarm: 8080, cleartype Alarm-Cancel
7 option(s) is/are activated without setting the license key
--- 04.10.2006 09:35:38 HMI-Emb 0 OPEN_WINDOW
Window opened: "Dummy-Window" (Id 1000, Appl. 3)
--- 04.10.2006 09:35:38 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Notebooks screen" (Id 5421, Appl. 3)
--- 04.10.2006 09:35:38 HMI-Emb 0 KEY_PRESSED
Key pressed: KEY_SELECT_MODE ( 0/44)
--- 04.10.2006 09:35:32 HMI-Emb 0 PI_CMD
PI-Command executed: _N_F_XFER "/_N_MPF_DIR"
--- 04.10.2006 09:35:31 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Program editor" (Id 35200, Appl. 3)
--- 04.10.2006 09:35:31 HMI-Emb 0 KEY_PRESSED
Key pressed: KEY_F8_V ( 0/5b)
--- 04.10.2006 09:35:27 HMI-Emb 0 PI_CMD
PI-Command executed: _N_F_OPEN "/_N_MPF_DIR/_N_NEUE_DATEI_MPF",
"_N_1_EDI"
--- 04.10.2006 09:35:26 HMI-Emb 0 OPEN_WINDOW
Window opened: "Program editor" (Id 35200, Appl. 3)
--- 04.10.2006 09:35:26 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Overview (program / work piece)" (Id 35100, Appl.
3)
--- 04.10.2006 09:35:26 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Dummy-Window" (Id 36070, Appl. 3)
--- 04.10.2006 09:35:25 HMI-Emb 0 WRITE_VAR
NCK-/PLC-Var. wrote: PLC:/DB19.DBX20.1 = 0
--- 04.10.2006 09:25:01 HMI-Emb 0 TOOL_CHANGED
Active tool in channel 1 changed to T0, D1
Active tool in channel 1 changed to T0, D1
Mode: AUTO Program: running Channel: active
Program-Level information:
Level Program Invoc Offset
running:
1 /_N_MPF_DIR/_N_RALF_MPF 1 5
stopped:
1 /_N_MPF_DIR/_N_RALF_MPF 1 #
Actual Block:
t0
x1
t1
Mise en service HMI Embedded (IM2)
Manuel de mise en service, 01/2008, 6FC5397-8CP10-1DA0
Diagnostic et maintenance
8.3 Enregistreur d'événements
117