Optional Components; Hooking Up Optional Components; Listening To Audio From A Connected Component - Sony NAS-CZ1 Mode D'emploi

Optional Components

Hooking up optional
components
To enhance your system, you can connect
optional components. Refer to the operating
instructions provided with each component.
Optional analog component
A ANALOG IN jack
Use an audio cord (not supplied) to connect an
optional analog component (MD deck or VCR,
etc.) to this jack. You can then listen to the sound
from the component.
30 GB
From the audio output
jacks of an optional
analog component
Listening to audio from a
connected component
1
Connect an audio cord.
See "Hooking up optional components" on
page 30.
2
Press FUNCTION repeatedly to switch
the function to ANALOG IN.
Start playing the connected component.