Registering The System On Your Computer Manually - Sony NAS-CZ1 Mode D'emploi

Registering the system on
your computer manually
When the system is connected to your computer
after installing the M-crew Server software, the
system is registered automatically on your
computer.
Register the system on your computer manually
for higher security.
1
Select "REGISTRATION?" in the
network menu (page 19), then press
ENTER.
The count down display appears in the
display of the system.
2
Click [Start] – [All programs] – [M-crew
Server] – [TOOLS] – [EQUIPMENT
LIST] in that order to display the screen
on the M-crew Server.
For details, see the Install Manual included
on the supplied CD-ROM.
3
During displaying the count down
display, click [Add] on your computer.
The registration starts.
"Complete!" appears in the display of the
system when the registration is completed.
Notes
• When the registration is incomplete, "Incomplete!"
appears in the display of the system.
• Step 3 must be performed within 5 minutes after
performing step 1.
22 GB