geo-FENNEL 360 LinerPoint HP Mode D'emploi page 10

EN
C
OPERATION
Set up laser
1. On the floor
or
2. On a tripod with a 1/4" or 5/8" thread
or
3. Fix bracket supplied with as a wall mount and
set up laser with screws on a wall
or
4. Fix the magnet of the wall mount on a magnetic
surface
or
5. Fix on a column by means of the fixing strap.
SWITCH ON
Switch instrument on by turning ON/OFF knob in position ON. Instrument is now ready for use (keypad
is illuminated). An audible and optical (blinking lines) alarm indicates if the instrument was set up
outside of compensator range. Set up instrument on a more even surface.
To switch instrument off turn ON/OFF knob back to OFF position. Instrument is now switched off and
the compensator is blocked to avoid damages during transport.
Note:
During transport ON/OFF knob (compensator lock) must be set to OFF . Disregard may lead to damages
of the compensator.
10