PowerPeak FHT8314P Mode D'emploi page 29

Step 5: Assembling the handle-bar
60R 62
64
55 57
60L 58
STEP 5
Make sure the hand pulse cable (62) hangs out from the handle-bar (64).
Attach the handle-bar (64) to the handlebar post (3) and secure it with the tube spacer (55) and the knob (58).
Then attach the plastic cover (60 L+R) to the handlebar post (3) and secure it with four screws (57).
Step 6: Assembling the computer
1
8
62
59
STEP 6
Connect the upper computer cable (8) and the hand pulse cable (62) with the computer (1).
Then attach the computer (1) to the handle bar (64) with four screws (59).
Step 7: Assembling the adapter
The adapter must be connected to the back side of the device. The arrow in the picture above shows the position of the adapter
connection.
29