Electric Shock Hazard - ASM 249164 Instructions De Service

The following are general Warnings related to the safe setup, use, grounding, maintenance and repair of this
equipment. Additional, more specific warnings may be found throughout the text of this manual where applicable.
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help
prevent fire and explosion:
D Use equipment only in well ventilated area.
D When flammable liquid is sprayed or used for flushing or cleaning, keep sprayer at least 20 feet
(6 m) from explosive vapors.
D Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic
drop clothes (potential static arc).
D Keep work area free of debris, including solvent, rags and gasoline.
D Do not plug or unplug power cords or turn power or lights on or off when flammable fumes are
present.
D Ground equipment and conductive objects in work area. Read Grounding instructions.
D Use grounded hoses.
D If there is static sparking or you feel a shock, stop operating immediately. Do not use equipment
until you identify and correct the problem.
D Keep a fire extinguisher in the work area.

ELECTRIC SHOCK HAZARD

Improper grounding, setup, or usage of the system can cause electric shock.
D Turn off and disconnect power cord before servicing equipment.
D Use only grounded electrical outlets
D Use only 3--wire extension cords.
D Ensure ground prongs are intact on sprayer and extension cords.
PRESSURIZED EQUIPMENT HAZARD
D Fluid from the gun/dispense valve, leaks, or ruptured components can splash in the eyes or on skin
and cause serious injury.
D Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning,
checking, or servicing equipment.
D Tighten all fluid connections before operating the equipment.
D Check hoses, tubes, and couplings daily. Replace worn or damaged parts immediately.
4 310959
WARNING