English
Double Insulated Tools
Tools marked with the words "Double Insulated" are equipped with a two prong plug.
These tools have a special insulation system that complies with applicable standards
of both Underwriter's Laboratories, Inc. and Canadian Standard Association. They do
not require grounding.
Extension Cords
Double insulated tools, like this one, have two
prong cords and can use either a two or three
prong extension cord. As the distance from the
supply outlet increases, heavier gauge extension
cords are required. The use of extension cords
of inadequate size wire causes a serious drop in
voltage and loss of power. Protect the cord from
damage. Keep cords away from excessive heat,
sharp edges and damp or wet areas. Repair or
replace damaged extension cords before using.
"This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not modify the plug in
any way."
4
Ext. Cord Length
Wire Gauge
40 Ft.
16
85 Ft.
14
100 Ft.
12
170 Ft.
10
270 Ft.
8
400 Ft.
6
650 Ft.
4
English
Limited Warranty
Steinel America, Inc. (the Company) warrants to the original end-user purchaser
(the Purchaser) that its HG 2300 EM Hot Air Gun (the Product), if properly operated
and maintained, and used under normal conditions, shall be free from defects in
workmanship and materials for a period of one (1) year from the date of purchase.
The obligation of the Company, and Purchaser's SOLE AND EXCLUSIVE REMEDY
hereunder, shall be limited to one of the following, at the Company's option:
(01) The repair or replacement of the Product.
(02) In the event the Company is unable to repair or replace the Product, the
Purchaser shall be entitled to a refund of the purchase price paid for the Product.
The Company shall have no obligation under this Limited W arranty for ordinary
wear and tear of the Product, or if the Product is modified by any other person or
organization.
Warranty performance procedure
In the event the Purchaser believes the Company may be responsible for the
performance of any warranty obligation, the Purchaser should send the Product; a
brief written description of the defect; and invoice or receipt specifying the date the
Product was purchased, where it was purchased, and the amount of the purchase
price, postage prepaid, to the Company.
The Company will inspect the Product within thirty (30) days after it receives the
Product and the requested information. If the Company determines that a defect
covered by this Limited Warranty exists, within thirty (30) days after the inspection,
the Company or a party designated by the Company, will attempt to make repair or
replacement of the Product. If this is not possible, a refund of the purchase price
paid for the Product will be paid to the Purchaser.
Disclaimers of warranties
The warranties contained herein are expressly in lieu of any other expressed or
implied warranties, or any other obligation on the part of the Company. Any implied
warranty of merchantability or fitness for a particular purpose shall expire one (1)
year after the date the Product is purchased by the original end-user Purchaser.
Any models, drawings, plans, specifications, affirmations of fact, promises, or other
communications by the Company with reference to the performance of the Product
are solely for the convenience of the Purchaser and shall not in any way modify the
expressed warranties and disclaimers set forth herein. The Purchaser
acknowledges it is purchasing the Product solely on the basis of the commitments
of the Company as expressly set forth herein. No agents or other parties are
authorized to make any warranties on behalf of the Company or to assume for the
Company any other liability in connection with the Product.
Some states do not allow limitations on how long an implied warranty lasts, so the
above limitation may not apply to you.
5